Wire mesh shot blasting machine is used in large quantities of small parts and thin-wall castings, thin-wall and fragile iron or aluminum ally castings, ceramic, and other workpiece surface cleaning. Placing several small workpieces side by side on the wire mesh belt can significantly increase the machine throughput. Standard transport speeds vary between 0.6 – 6 m/min. When the workpieces pass through shot blasting area, rust, dust, oxide layers or sand, burr will be removed. With machine widths from 600 to 1,500 mm, the wire mesh shot blasting machine can practically handle any work piece size and throughput with minimum space requirements.
The equipment is comprised of Mn13 wire mesh BELT, shot blasting chamber, blasting turbine, shots recycle system, shots clean off system, dust removing system and electrical control system etc.
Name |
Wire Mesh Belt Shot Blasting Machine |
Model | KLWD1100-4 |
Blasting Chamber Open Size W×H | 1200×550mm |
Products Size W×H | 600×350mm |
Wire Mesh Belt Loading | 150kgs/m |
Wire Mesh Width | 1100mm |
Wire Mesh Hole Size W× L | 60×100mm |
Blasting Wheel | 200kg/min×4 11kw×4 |
Abrasive Recycle Capacity | 48t/hr |
Dust Removing Air Flow | 7260m3/hr |
Dust Collector
| Pulse Jet Dust Collector - Bag Filter Type
|
Dust Emission Density | ≤30mg/m3 |
Size of Equipment | 9500×4500×6050mm |
Noise | ≤85dB |
Total Power | ~ 72 kw |
