Blast Nozzle Holder

Description

The nozzle holders are available in nylon, aluminum and cast iron. All types are complete with high wear, replaceable rubber gaskets. All Blast Nozzle holders are manufactured to fit externally over the blast hose. Internal grip rings bite into the blast hose for a safe and secure fit and retaining screws provide additional holding power without penetrating the inner hose layer.

Nylon Blast Nozzle Holder

Kholee Blast nylon nozzle holders provide minimal weight receptacle for the nozzles and helps reduce operator fatigue. Manufactured to fit outer over the blast retaining screws provide additional holding power without penetrating the inner hose layer. To suit nozzles with 1-1/4” NPS or BSP and 50mm (2”) contractor thread. Working temperature range: -40°C ~ +80°C.

Model	Specification
NHE-1	3/4” fine thread to blast nozzle, to fit blast hose with O.D 28mm (1-1/8”), material PA6+25GF
NHE-2	1-1//4” fine thread to blast nozzle, to fit blast hose with O.D 34mm (1-5/16”), material PA6+25GF
HE-1	1-1/4” fine thread to blast nozzle, to fit blast hose 1” with O.D 39mm (1-1/2”), material PA6+25GF
HE-2	1-1/4” fine thread to blast nozzle, to fit blast hose 1-1/4” with O.D 49mm (1-7/8”), material PA6+25GF
HE-3	1-1/4” fine thread to blast nozzle, to fit blast hose 1-1/2” with O.D 55mm (2-3/16”), material PA6+25GF
MHE-1M	2” contractor thread to blast nozzle, to fit blast hose 3/4” with O.D 34mm (1-5/16”), material PA6+25GF, With Washer
MHE-1	2” contractor thread to blast nozzle, to fit blast hose 1” with O.D 39mm (1-1/2”), material PA6+25GF, With Washer
MHE-2	2” contractor thread to blast nozzle, to fit blast hose 1-1/4” with O.D 49mm (1-7/8”), material PA6+25GF, With Washer
MHE-3	2” contractor thread to blast nozzle, to fit blast hose 1-1/2” with O.D 55mm (2-3/16”), material PA6+25GF, with Washer

Aluminium Blast Nozzle Holder

Kholee Blast aluminium nozzle holders provide a light weight receptacle for the nozzles. Manufactured from super tough injection moulded aluminum. Recommended for using in harsh environments. Aluminium nozzle holders ensure long life and precise dimensions. All types are complete with high wear, attached rubber gasket. To suit nozzles with 1-1/4” NPS or BSP and 50mm (2”) contractor thread.

Model	Specification
ANH-3/4	3/4” fine thread to blast nozzle, to fit blast hose with O.D 34mm (1-5/16”), material Aluminum
ANH-1	1-1//4” fine thread to blast nozzle, to fit blast hose with O.D 39mm (1-1/2”), material Aluminium
ANH-2	1-1/4” fine thread to blast nozzle, to fit blast hose with O.D 49mm (1-7/8”), material Aluminium
ANH-3	1-1/4” fine thread to blast nozzle, to fit blast hose with O.D 55mm (2-3/16”), material Aluminium
ANH-4	1-1/4” fine thread to blast nozzle, to fit blast hose with O.D 60mm (2-3/8”), material Aluminium
ANH-1M	2” contractor thread to blast nozzle, to fit blast hose with O.D 39mm (1-1/2”), material Aluminium
ANH-2M	2” contractor thread to blast nozzle, to fit blast hose with O.D 49mm (1-7/8”, material Aluminium
ANH-3M	2” contractor thread to blast nozzle, to fit blast hose with O.D 55mm (2-3/16”), material Aluminium
ANH-4M	2” contractor thread to blast nozzle, to fit blast hose with O.D 60mm (2-3/8”), material Aluminium

Aluminium Blast Nozzle Holder_副本.jpg

Description

send inquiry to us

Related Product

KLSC600-1 Portable Blast Machine

KLSC400-1 Portable SandBlast Machine

KLSC300-1 Portable Abrasive Blast Machine

KLSC100-1 Portable Pressure Blast Machine

KLSC50-1 Portable Blast Machine

KLDC800-DO Portable Abrasive Blast Machine

Portable Abrasive Blast Machine

Blast Nozzle

Chat with us